Peristaltic pump filling system

Peristaltic pump filling system consists of 2 sets drive units, 304 stainless steel housing with good corrosion resistance.
Controller and dispensing system are separated, to allow flexible mounting way. Controller adopts 7-inch industrial touchscreen interface to operate easily and friendly, to control max 32channels.
Each channel has an independent membrane key and LED display, which can be used to set the channel address and calibrate the dispensing volume when the system is running or stop.
The pump could be controlled through controller, external control and RS485 communication, to meet the requirement from different users.
Each channel could be stopped filling without bottle.

Technical Data

Filling volume	0.05mL~9999.99mL
Filling accuracy	≤±2%
Filling time	0.5s~6000s
Filling cycles	0~999999 (0 means unlimited))
Number of channels	2
Display	7-inch color LCD for parameters
Work mode	Parallel filling
Control mode	Touch screen control; Footswitch control; External control; Communication control
Calibration	Manual
Calibration method	Calibrate with volume or weight offline; Calibrate with ratio online
Parameter recipe	Can store 5 recipes
External control	start; disable channel
Communication control	Interface: RS485; Protocol: Modbus RTU
Power supply	FU2B-1-1: AC220±20%/150W; FC32S-1-2: AC90-260V/10W，50/60Hz
Operating temperature	0℃-40℃
Relative humidity	20%-80%
IP rating	IP31